Skip to content

Wooden napkin holder

Made for your napkins: the compartment follows the format, the weight holds the stack and carries shape, logo and text — your brand on the table. Slotted together without glue.

  • · Compartment to napkin format
  • · Engraved logo, on both sides if you like
  • · Fixed price and 3D preview instantly
Design a napkin holder
Drawing of a napkin holder: base, two sides with logo, stacked napkins and wooden slider

How it works

  1. 1

    Choose the format

    Cocktail, 33 × 33 or 40 × 40, folded in quarters or eighths — the compartment adapts. Custom dimensions work too.

  2. 2

    Design the weight

    Wooden slider or heavier with a steel rod, top edge straight, basket arch, wave or scalloped — plus your logo and a line of text on it. The logo on the side too, if you like.

  3. 3

    Slot together

    The parts arrive cut. Push the base through the sides, add napkins, set the weight on top — done.

For every napkin format

  • Napkins 24 × 24 cm, folded in quartersfrom €17.45
  • Napkins 33 × 33 cm, folded in quartersfrom €19.48
  • Napkins 33 × 33 cm, folded in eighthsfrom €23.17
  • Napkins 40 × 40 cm, folded in quartersfrom €22.06

What you can adjust

  • Napkin format

    Four common formats from 24 × 24 to 40 × 40 cm — or inner width and depth to the millimetre.

  • Weight

    A wooden slider over the sides holds the napkins — with a steel rod heavy enough for the terrace. Its top edge comes in four shapes, with room on top for logo and text.

  • Logo

    Engraved as a filled area or as a fine outline, on one or both sides — from SVG, PDF or an image.

  • Material

    Poplar 4 or 5 mm, birch 3 mm, MDF 5 mm — raw and untreated.

  • Side height

    From 60 to 120 mm — taller holds more napkins and more logo.

  • For your brand

    Create a brand in your account — logo and material are then already set for every product, and you can find everything you ordered again.

Design a napkin holder

Material & joints

Slotted together from poplar or birch plywood or MDF: the base is exactly as wide as the napkins plus two sides and pushes flush through the sides with tenons; the weight runs in two slots over the sides. No glue, no screws.

The surface stays raw. The holder is meant for napkins, not for direct contact with food. Wipe dry or with a barely damp cloth, not dishwasher safe.

Frequently asked questions

Which format do I need?

For the standard restaurant napkin of 33 × 33 cm, folded in quarters, the compartment is 172 × 60 mm. Cocktail napkins of 24 × 24 cm need 128 mm, large ones of 40 × 40 cm need 208 mm. If yours are folded differently, enter the inner width and depth yourself.

What is the weight for?

It rests on the stack so nothing blows away outdoors and guests can pull out the top napkin singly. The wooden slider is enough indoors; with a steel rod it is heavy enough for the terrace.

How does my logo get onto the holder?

Upload it as SVG, PDF or an image — we convert images to vectors and engrave the logo onto the side, as a filled area or an outline. You confirm that you are entitled to use it.

Do I have to glue anything?

No. The base is pushed with tenons through the windows of the sides; the weight slides over the sides. Everything comes apart again for cleaning.

Is the wood food-safe?

The wood stays raw and untreated. The holder is made for napkins — it is not intended for direct contact with food.

Can I reorder?

Yes. Every order gets a configuration number; with it you reopen the same holder and order more — with a brand in your account you find everything under “My brands”.

Can I return it?

Every holder is made to your specifications — as a made-to-measure product it is excluded from the right of withdrawal (§ 312g (2) no. 1 BGB).

Design a napkin holder